Walk in chamber for Complex Salt Spray Test (Temperature controllable)

 

Relevant standards requirement

  1. Test Object: battery pack andsystem.
  2. Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions.
  3. The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water，Its concentration is (5 + 1)% (mass fraction).
  4. (35 ± 2) ℃, the measured pH value is between 6.5-7.2.
  5. Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2.
  6. Total 6 cycles testing.
  7. Salt spray test is not necessary for the test objects being installed in passenger, luggage or cargo compartments.
If you want to know more about the walk in chamber for complex salt spray tester: https://belltestchamber.com/battery-test-chamber/complex-salt-spray-test-chamber


Comments

Post a Comment

Popular posts from this blog

The System of High Low Temperature Chamber, Temperature Humidity Test Chamber

Image
  Interpretation of environmental simulation tests: There is all kind of environments in nature: high temperature, low temperature, humidity, ultraviolet light, sunlight, rain, etc. Different natural environments affect all kinds of our lives to varying degrees. An environmental simulation test is an activity performed to maintain functional reliability in all environments of expected use, transportation, or storage. It is to expose the product to natural or artificial environmental conditions to undergo its effects, in order to evaluate the performance of the product in the actual use, transportation, and storage of environmental conditions, and to analyze and study the degree of influence of environmental factors and their mechanisms. Introduce our Bell’s high and low temperature test chambers, constant temperature and humidity test chambers, both of which are also environmental chambers for battery safety.       The following introduces our environmental test chamber systems, suc
Read more

High and Low Temperature Environmental Chamber — Test the Temperature Resistance of Products

  Temperature is the inevitable stress that every product of materials experiences at the testing stage after development. How the product or material reacts to the effect of stress might differ from each other. When people purchase electronics they use it differently, while some may use the electronic products as recommended by the manufacturer others will typically abuse it. This is why each manufactured product needs to undergo temperature qualifications, life testing, and other additional evaluation before officially introducing it in the marketplace. These products at the initial developmental stage are subjected to a series of temperature testing ranging from high to low. There are many things to consider when ensuring the safety of developed products for customers and so of the questions you’re looking for its answer might include:   What is a high and low temperature environmental chamber? Environmental chambers come with different features that include high temperature and low
Read more

5 Aspects to Comprehensive Understanding of the Salt Spray Chamber

The salt spray method is a popular process, which ensures that materials and products are tested for corrosion determining its ability to adapt to certain environmental conditions. This process requires the use of a testing chamber to check the corrosion resistance of different products or materials surface. The use of salt spray method applies to certain metallic materials and products, which can be metals, alloys, and others. Products that are finished with a surface coating of metallic will require  salt spray testing  to determine the degree of corrosion. During the testing period, the salt spray produces a corrosive attack on the material to evaluate its degree of sustainability or amount of damages the material incurs at certain conditions. The salt spray testing period depends on the material’s ability to resist corrosion, which can be due to its coating or finishing features. This means that the higher the material’s ability to resist corrosion, the longer it will take the test
Read more